ocf_heartbeat_Raid1 — Manages a software RAID1 device on shared storage
Raid1
[ start | stop | status | monitor | meta-data | validate-all ]
raidconf
The RAID configuration file. e.g. /etc/raidtab or /etc/mdadm.conf. (required, string, no default)
raiddev
The block device to use. (required, string, no default)
homehost
The value for the homehost directive; this is an mdadm feature to protect RAIDs against being activated by accident. It is recommended to create RAIDs managed by the cluster with "homehost" set to a special value, so they are not accidentially auto-assembled by nodes not supposed to own them. (optional, string, no default)
This resource agent supports the following actions (operations):
start
Starts the resource. Suggested minimum timeout: 20s.
stop
Stops the resource. Suggested minimum timeout: 20s.
status
Performs a status check. Suggested minimum timeout: 20s. Suggested interval: 10.
monitor
Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 10.
validate-all
Performs a validation of the resource configuration. Suggested minimum timeout: 5.
meta-data
Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.