ocf_heartbeat

Name

ocf_heartbeat_iscsi — Manages a local iSCSI initiator and its connections to iSCSI targets

OCF Resource Agent for iSCSI. Add (start) or remove (stop) iSCSI targets.

portal: The iSCSI portal address in the form: {ip_address|hostname}[":"port] (required, string, no default)
target: The iSCSI target. (required, string, no default)
discovery_type: Discovery type. Currently, with open-iscsi, only the sendtargets type is supported. (optional, string, default sendtargets)
iscsiadm: iscsiadm program path. (optional, string, no default)
udev: If the next resource depends on the udev creating a device then we wait until it is finished. On a normally loaded host this should be done quickly, but you may be unlucky. If you are not using udev set this to "no", otherwise we will spin in a loop until a timeout occurs. (optional, string, default yes)

This resource agent supports the following actions (operations):

start: Starts the resource. Suggested minimum timeout: 120.
stop: Stops the resource. Suggested minimum timeout: 120.
status: Performs a status check. Suggested minimum timeout: 30.
monitor: Performs a detailed status check. Suggested minimum timeout: 30. Suggested interval: 120.
validate-all: Performs a validation of the resource configuration. Suggested minimum timeout: 5.
methods: Suggested minimum timeout: 5.
meta-data: Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

The following is an example configuration for a iscsi resource using the crm(8) shell:

primitive example_iscsi ocf:heartbeat:iscsi \
  params \
    portal=string \
    target=string \
  op monitor depth="0" timeout="30" interval="120"